In comparison to cracked screens and freezing hard drives, battery life is one of the top items like an iPhone, iPod, or iPad inside the Apple smartphone portable device. While there are various settings on your phone which will improve the battery life, it becomes an expensive paperweight until the battery is dead. If you’re ready to take on the battery shift task yourself, then obey the measures listed below. If you wish to learn more about this, visit Lenexa Iphone Battery Replacement
Product you need to swap your iPhone battery with a specially crafted screw driver named a Torx Screw Driver package. You’ll need a replacement battery, in fact. Both these can be purchased at numerous online stores. Now let’s start the process of fixing.
The first move in extracting an iPhone battery is to put in the tiny hole next to the headphone jack the pointy end of a safety pin. That will remove the back plate portion of the tray. First, cut the two dock end screws at both ends. You now want to distinguish the front window from the back panel by wedging the spudger between the front panel in glass and the ring in chrome. Always be careful not to cut any ribbons which still bind both frames. Then with the spudger cut cables numbered “1” then “2” in that specific order. You will remove the last ribbon cable by tossing up the white tab keeping it in place. This will allow full differentiation of the front and back situations. Next, through the 8 screws that tie the motherboard back. Undo the “4” string, then raise the motherboard back. It is still connected by a cord heading to the frame. Cut the specific ribbon from camera and set aside the motherboard. Pry the frame off so you can move the logic board down. Before doing so, make sure that all screws which protect the logic board are removed. Turn on the battery button to disable it. Replace it with the latest one, and bring all the pieces back together in the opposite order in which you cut them off.
Does the iPhone sound too hard for battery replacement? To most novices, it appears to be. Typically several users can get smartphones taken apart there to remove the iPhone charger, then fail to get them back together. Only note that your system contains a lot of small parts and extreme care should be used so as not to lose them.